Acid green 20
Modification of Nano-zeolite Clinoptilolite by iron oxide Magnetic Nanoparticles for green acid 20 Dye Removal from Aqueous Solution [Volume 36, Issue 2, 2021-2022, Pages 90-104]
Acoustic tomography
Investigation on biomechanical properties of pinus nigra Using stress wave technique and resistography [Volume 36, Issue 2, 2021-2022, Pages 144-156]
Adhesion
Study of thermal fatigue on the cracking, adhesion and gloss properties of wood coatings [Volume 36, Issue 2, 2021-2022, Pages 119-131]
Adhesive
The study of joints in Oak wood beam compared to the location of node and anti-node of longitudinal vibration [Volume 36, Issue 3, 2021-2022, Pages 256-263]
Alphacellulose
Investigation of the quality of cellulosic compounds of some Calotropis procera Willd. ecotypes in southern Iran [Volume 36, Issue 3, 2021-2022, Pages 171-181]
Aluminum three hydrates (ATH)
The effect of using flame retardant mineral fillers on physical and thermal properties of poly lactic acid-rice husk composite [Volume 36, Issue 2, 2021-2022, Pages 105-118]
ARIMA model
The feasibility of Utilizing Lignocellulosic Wastes for the Bioethanol Production In Iran:Application of ARIMA Time Series Model [Volume 36, Issue 4, 2021-2022, Pages 340-355]
Auto-Regressive Distributed Lag (ARDL)
The Effect of Exchange Rate on the Imports of Paper Products in Iran [Volume 36, Issue 4, 2021-2022, Pages 356-367]
B
Bending strength
Influence of Hygrothermal Modification on Surface Characteristics and Failure Modes of Poplar Wood [Volume 36, Issue 2, 2021-2022, Pages 132-143]
Biodegradable polymer
Preparation and characterization of the cellulose nanocrystal properties from recycled papers and its application as a reinforcement agent in the hydroxypropyl methyl cellulose/cationic starch nanocomposite for use in food packaging industries [Volume 36, Issue 3, 2021-2022, Pages 243-255]
Bioethanol
The feasibility of Utilizing Lignocellulosic Wastes for the Bioethanol Production In Iran:Application of ARIMA Time Series Model [Volume 36, Issue 4, 2021-2022, Pages 340-355]
Bionanocomposite film
Preparation and characterization of the cellulose nanocrystal properties from recycled papers and its application as a reinforcement agent in the hydroxypropyl methyl cellulose/cationic starch nanocomposite for use in food packaging industries [Volume 36, Issue 3, 2021-2022, Pages 243-255]
C
Calotropis procera
Investigation of the quality of cellulosic compounds of some Calotropis procera Willd. ecotypes in southern Iran [Volume 36, Issue 3, 2021-2022, Pages 171-181]
Carbon nanofiber
Study of the effect of carbon nanofiber reinforced epoxy adhesive on the flexural moment capacity of corner joints in furniture [Volume 36, Issue 4, 2021-2022, Pages 305-316]
Cellulose Nano fiber
Evaluation of physical and mechanical properties of Nanocomposites made of polyvinyl alcohol - Nanofiber cellulose and Nano silicon dioxide [Volume 36, Issue 1, 2021-2022, Pages 78-89]
Cellulose nanofibers
Investigation of replacement of imported long fiber pulp with cellulose nanofibers and cationic materials in the production of durable paper [Volume 36, Issue 2, 2021-2022, Pages 157-169]
Cellulose nanofibers
The effect of dry- heat aging on properties of handmade papers reinforced with cellulose nanofibers treatment [Volume 36, Issue 4, 2021-2022, Pages 317-328]
CMP pulp
Effect of Polyalumium Chloride and Nano-Chitosan Bio-polymeric System on the Optical and Mechanical Properties of Chemi-mechanical Pulp (CMP) [Volume 36, Issue 4, 2021-2022, Pages 368-381]
Color changes
The effect of glide plasma with methane gas on the hydrophobicity of poplar wood surface [Volume 36, Issue 3, 2021-2022, Pages 264-282]
Composite
The effect of using flame retardant mineral fillers on physical and thermal properties of poly lactic acid-rice husk composite [Volume 36, Issue 2, 2021-2022, Pages 105-118]
Composition
The Possibility of Utilization of Pistachio lignocellulosic residue in Particleboard Production [Volume 36, Issue 4, 2021-2022, Pages 329-339]
Compression
Effect of press conditions on physical and mechanical properties of hydro thermo- mechanical treated poplar wood [Volume 36, Issue 3, 2021-2022, Pages 218-230]
Contact angle
Influence of Hygrothermal Modification on Surface Characteristics and Failure Modes of Poplar Wood [Volume 36, Issue 2, 2021-2022, Pages 132-143]
Contact angle
The effect of glide plasma with methane gas on the hydrophobicity of poplar wood surface [Volume 36, Issue 3, 2021-2022, Pages 264-282]
D
Delphi method
Application of Delfi Method in Identification of Influential Factors on Risk Management Model for Wooden Structures [Volume 36, Issue 3, 2021-2022, Pages 194-204]
Dimensional stability
Evaluation of Applied Performance of Thermally-Modified Fir Wood by Retification Process [Volume 36, Issue 3, 2021-2022, Pages 205-217]
E
Earthquake
Application of Delfi Method in Identification of Influential Factors on Risk Management Model for Wooden Structures [Volume 36, Issue 3, 2021-2022, Pages 194-204]
Ecophysiology
Comparing growth rate, wood fiber biometry, and adaptability of different tamarisk (Tamarix aphylla L.) populations planted in Garmsar [Volume 36, Issue 1, 2021-2022, Pages 26-39]
Environment
Effect of using waste tire rubber on physical and mechanical properties of Paulownia Oriented strand boards [Volume 36, Issue 1, 2021-2022, Pages 1-13]
Error Correction Model (ECM)
The Effect of Exchange Rate on the Imports of Paper Products in Iran [Volume 36, Issue 4, 2021-2022, Pages 356-367]
Exchange rate
The Effect of Exchange Rate on the Imports of Paper Products in Iran [Volume 36, Issue 4, 2021-2022, Pages 356-367]
F
Fiber fines
The effect of fractionation and fine material removal from old corrugated container pulp on the properties of the produced paperboard in comparison to long fiber application [Volume 36, Issue 4, 2021-2022, Pages 382-393]
Formaldehyde release
Effect of using waste tire rubber on physical and mechanical properties of Paulownia Oriented strand boards [Volume 36, Issue 1, 2021-2022, Pages 1-13]
Furfural
Use soda lignin and modify it with furfural as adhesive to make plywood [Volume 36, Issue 4, 2021-2022, Pages 293-304]
G
Gypsum
Investigation of the effect of nano-wollastonite on the functional properties of gypsum-based composites made of rice straw [Volume 36, Issue 1, 2021-2022, Pages 14-25]
H
Hand made paper
The effect of dry- heat aging on properties of handmade papers reinforced with cellulose nanofibers treatment [Volume 36, Issue 4, 2021-2022, Pages 317-328]
Harvest time
The effect of harvesing time on kenaf biomass and quality of carton top liner [Volume 36, Issue 1, 2021-2022, Pages 40-52]
Hemp fibers
The effect of dry- heat aging on properties of handmade papers reinforced with cellulose nanofibers treatment [Volume 36, Issue 4, 2021-2022, Pages 317-328]
Holocellulose
Investigation of the quality of cellulosic compounds of some Calotropis procera Willd. ecotypes in southern Iran [Volume 36, Issue 3, 2021-2022, Pages 171-181]
Hydro Thermo-Mechanical Treatment
Effect of press conditions on physical and mechanical properties of hydro thermo- mechanical treated poplar wood [Volume 36, Issue 3, 2021-2022, Pages 218-230]
Hydroxypropyl methylcellulose
Preparation and characterization of the cellulose nanocrystal properties from recycled papers and its application as a reinforcement agent in the hydroxypropyl methyl cellulose/cationic starch nanocomposite for use in food packaging industries [Volume 36, Issue 3, 2021-2022, Pages 243-255]
I
Import of Paper Products
The Effect of Exchange Rate on the Imports of Paper Products in Iran [Volume 36, Issue 4, 2021-2022, Pages 356-367]
Industrial wastewater
Modification of Nano-zeolite Clinoptilolite by iron oxide Magnetic Nanoparticles for green acid 20 Dye Removal from Aqueous Solution [Volume 36, Issue 2, 2021-2022, Pages 90-104]
J
Joint
The study of joints in Oak wood beam compared to the location of node and anti-node of longitudinal vibration [Volume 36, Issue 3, 2021-2022, Pages 256-263]
K
Keywords: heterogeneous catalyst
Synthesis of a new heterogeneous acidic catalyst from Luffa as a lignocellulosic material [Volume 36, Issue 1, 2021-2022, Pages 64-77]
Keywords: Particle board
The Possibility of Utilization of Pistachio lignocellulosic residue in Particleboard Production [Volume 36, Issue 4, 2021-2022, Pages 329-339]
Keywords: Surface roughness
Influence of Hygrothermal Modification on Surface Characteristics and Failure Modes of Poplar Wood [Volume 36, Issue 2, 2021-2022, Pages 132-143]
L
LIGNIN
Use soda lignin and modify it with furfural as adhesive to make plywood [Volume 36, Issue 4, 2021-2022, Pages 293-304]
Luffa
Synthesis of a new heterogeneous acidic catalyst from Luffa as a lignocellulosic material [Volume 36, Issue 1, 2021-2022, Pages 64-77]
M
Magnesium di-hydroxide (MDH)
The effect of using flame retardant mineral fillers on physical and thermal properties of poly lactic acid-rice husk composite [Volume 36, Issue 2, 2021-2022, Pages 105-118]
Management risk
Application of Delfi Method in Identification of Influential Factors on Risk Management Model for Wooden Structures [Volume 36, Issue 3, 2021-2022, Pages 194-204]
MDF
Study of the effect of carbon nanofiber reinforced epoxy adhesive on the flexural moment capacity of corner joints in furniture [Volume 36, Issue 4, 2021-2022, Pages 305-316]
MECHANICAL PROPERTIES
Production wood plastic of polypropylene/ poplar wood flour and starch powder with improved mechanical and biodegradability properties [Volume 36, Issue 3, 2021-2022, Pages 182-193]
MECHANICAL PROPERTIES
The effect of starch sizing on the aesthetic and mechanical properties of historical papers [Volume 36, Issue 4, 2021-2022, Pages 394-403]
Modulus of elasticity
Use soda lignin and modify it with furfural as adhesive to make plywood [Volume 36, Issue 4, 2021-2022, Pages 293-304]
Modulus of rupture
Investigation of the effect of nano-wollastonite on the functional properties of gypsum-based composites made of rice straw [Volume 36, Issue 1, 2021-2022, Pages 14-25]
Modulus of rupture
Use soda lignin and modify it with furfural as adhesive to make plywood [Volume 36, Issue 4, 2021-2022, Pages 293-304]
Mofid hybrid populus
Investigating the use of wood-flour of hybrid populus (euphratica-alba) cultivar of “Mofid” in wood-plastic composite [Volume 36, Issue 3, 2021-2022, Pages 231-242]
N
Nano-Chitosan
Effect of Polyalumium Chloride and Nano-Chitosan Bio-polymeric System on the Optical and Mechanical Properties of Chemi-mechanical Pulp (CMP) [Volume 36, Issue 4, 2021-2022, Pages 368-381]
Nanocrystalline Cellulose
Preparation and characterization of the cellulose nanocrystal properties from recycled papers and its application as a reinforcement agent in the hydroxypropyl methyl cellulose/cationic starch nanocomposite for use in food packaging industries [Volume 36, Issue 3, 2021-2022, Pages 243-255]
Nano silicon dioxide
Evaluation of physical and mechanical properties of Nanocomposites made of polyvinyl alcohol - Nanofiber cellulose and Nano silicon dioxide [Volume 36, Issue 1, 2021-2022, Pages 78-89]
Nanozeolite Cliniptilolite
Modification of Nano-zeolite Clinoptilolite by iron oxide Magnetic Nanoparticles for green acid 20 Dye Removal from Aqueous Solution [Volume 36, Issue 2, 2021-2022, Pages 90-104]
N-tert butyl carbamate
Synthesis of a new heterogeneous acidic catalyst from Luffa as a lignocellulosic material [Volume 36, Issue 1, 2021-2022, Pages 64-77]
O
Old recycled pulp
The Effect of Using Cationic Starch and Bentonite on Physical and Mechanical Properties of Old Recycled Pulp [Volume 36, Issue 4, 2021-2022, Pages 404-416]
Optical and mechanical properties
Effect of Polyalumium Chloride and Nano-Chitosan Bio-polymeric System on the Optical and Mechanical Properties of Chemi-mechanical Pulp (CMP) [Volume 36, Issue 4, 2021-2022, Pages 368-381]
P
Paper properties
The effect of dry- heat aging on properties of handmade papers reinforced with cellulose nanofibers treatment [Volume 36, Issue 4, 2021-2022, Pages 317-328]
Phenol formaldehyde
Effect of using waste tire rubber on physical and mechanical properties of Paulownia Oriented strand boards [Volume 36, Issue 1, 2021-2022, Pages 1-13]
PHYSICAL AND MECHANICAL PROPERTIES
Effect of press conditions on physical and mechanical properties of hydro thermo- mechanical treated poplar wood [Volume 36, Issue 3, 2021-2022, Pages 218-230]
PHYSICAL AND MECHANICAL PROPERTIES
The Possibility of Utilization of Pistachio lignocellulosic residue in Particleboard Production [Volume 36, Issue 4, 2021-2022, Pages 329-339]
Polyacrylamide
Investigation of replacement of imported long fiber pulp with cellulose nanofibers and cationic materials in the production of durable paper [Volume 36, Issue 2, 2021-2022, Pages 157-169]
Polyalumium chloride
Effect of Polyalumium Chloride and Nano-Chitosan Bio-polymeric System on the Optical and Mechanical Properties of Chemi-mechanical Pulp (CMP) [Volume 36, Issue 4, 2021-2022, Pages 368-381]
Poly ethylene
Investigating the use of wood-flour of hybrid populus (euphratica-alba) cultivar of “Mofid” in wood-plastic composite [Volume 36, Issue 3, 2021-2022, Pages 231-242]
Poly Lactic Acid
The effect of using flame retardant mineral fillers on physical and thermal properties of poly lactic acid-rice husk composite [Volume 36, Issue 2, 2021-2022, Pages 105-118]
Polyvinyl Alcohol
Evaluation of physical and mechanical properties of Nanocomposites made of polyvinyl alcohol - Nanofiber cellulose and Nano silicon dioxide [Volume 36, Issue 1, 2021-2022, Pages 78-89]
Poplar
Effect of press conditions on physical and mechanical properties of hydro thermo- mechanical treated poplar wood [Volume 36, Issue 3, 2021-2022, Pages 218-230]
Pulp fractionation
The effect of fractionation and fine material removal from old corrugated container pulp on the properties of the produced paperboard in comparison to long fiber application [Volume 36, Issue 4, 2021-2022, Pages 382-393]
R
Recycled paper
Preparation and characterization of the cellulose nanocrystal properties from recycled papers and its application as a reinforcement agent in the hydroxypropyl methyl cellulose/cationic starch nanocomposite for use in food packaging industries [Volume 36, Issue 3, 2021-2022, Pages 243-255]
Resistography
Investigation on biomechanical properties of pinus nigra Using stress wave technique and resistography [Volume 36, Issue 2, 2021-2022, Pages 144-156]
Rice husk
The effect of using flame retardant mineral fillers on physical and thermal properties of poly lactic acid-rice husk composite [Volume 36, Issue 2, 2021-2022, Pages 105-118]
Rice straw
Investigation of the effect of nano-wollastonite on the functional properties of gypsum-based composites made of rice straw [Volume 36, Issue 1, 2021-2022, Pages 14-25]
Roughness changes
The effect of glide plasma with methane gas on the hydrophobicity of poplar wood surface [Volume 36, Issue 3, 2021-2022, Pages 264-282]
S
SEM
The effect of glide plasma with methane gas on the hydrophobicity of poplar wood surface [Volume 36, Issue 3, 2021-2022, Pages 264-282]
Stress wave
Investigation on biomechanical properties of pinus nigra Using stress wave technique and resistography [Volume 36, Issue 2, 2021-2022, Pages 144-156]
Surface cracking
Study of thermal fatigue on the cracking, adhesion and gloss properties of wood coatings [Volume 36, Issue 2, 2021-2022, Pages 119-131]
V
VESSEL
Comparing growth rate, wood fiber biometry, and adaptability of different tamarisk (Tamarix aphylla L.) populations planted in Garmsar [Volume 36, Issue 1, 2021-2022, Pages 26-39]
Vibrating antinode
The study of joints in Oak wood beam compared to the location of node and anti-node of longitudinal vibration [Volume 36, Issue 3, 2021-2022, Pages 256-263]
Vibrating nodes
The study of joints in Oak wood beam compared to the location of node and anti-node of longitudinal vibration [Volume 36, Issue 3, 2021-2022, Pages 256-263]
W
Waste Management
Effect of using waste tire rubber on physical and mechanical properties of Paulownia Oriented strand boards [Volume 36, Issue 1, 2021-2022, Pages 1-13]
Water vapor permeability
Evaluation of physical and mechanical properties of Nanocomposites made of polyvinyl alcohol - Nanofiber cellulose and Nano silicon dioxide [Volume 36, Issue 1, 2021-2022, Pages 78-89]
Wooden dowel
Study of the effect of carbon nanofiber reinforced epoxy adhesive on the flexural moment capacity of corner joints in furniture [Volume 36, Issue 4, 2021-2022, Pages 305-316]
Wooden structures
Application of Delfi Method in Identification of Influential Factors on Risk Management Model for Wooden Structures [Volume 36, Issue 3, 2021-2022, Pages 194-204]
Wood fibers
Evaluating Thermal Properties and Biodegradability of Nanocomposites based Polylactic Acid (PLA) / Wood Fibers- [Volume 36, Issue 3, 2021-2022, Pages 283-292]
Wood-flour
Investigating the use of wood-flour of hybrid populus (euphratica-alba) cultivar of “Mofid” in wood-plastic composite [Volume 36, Issue 3, 2021-2022, Pages 231-242]
WOOD FLOUR
Production wood plastic of polypropylene/ poplar wood flour and starch powder with improved mechanical and biodegradability properties [Volume 36, Issue 3, 2021-2022, Pages 182-193]
Wood modification
Evaluation of Applied Performance of Thermally-Modified Fir Wood by Retification Process [Volume 36, Issue 3, 2021-2022, Pages 205-217]
Wood-plastic composite
Investigating the use of wood-flour of hybrid populus (euphratica-alba) cultivar of “Mofid” in wood-plastic composite [Volume 36, Issue 3, 2021-2022, Pages 231-242]
Wood pulp
The effect of dry- heat aging on properties of handmade papers reinforced with cellulose nanofibers treatment [Volume 36, Issue 4, 2021-2022, Pages 317-328]
